Victron Energy 4A Trickle Charger 12V/4A, Ideal for Car / Van / Leisure / Caravan - BPC120480034R

Victron Energy 4A Trickle Charger 12V/4A, Ideal for Car / Van / Leisure / Caravan - BPC120480034R

CALL US 01684 298 800

Victron Energy 4A Trickle Charger 12V/4A, Ideal for Car / Van / Leisure / Caravan - BPC120480034R

Victron Energy 1.1A Trickle Battery Charger, Ideal for Motorcycle/Motobike - BPC120180034R

Victron Energy 1.1A Trickle Battery Charger, Ideal for Motorcycle/Motobike - BPC120180034R

Victron Energy Blue Power IP65 Charger 24V 8A

Victron Energy Blue Power IP65 Charger 24V 8A

£45.15
Availability: In stock
SKU
BPC120480034R
Rating:
100% of 100
  • IP65 12V/4A – 12V/0,8A
  • Victron Energy
  • 12V
  • 4
  • 50/60

Automotive IP65 Battery Charger 12V/4A - 12V/0,8A with DC connector

DC connector

Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

Less maintenance and aging when the battery is not in use: the Storage Mode

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Protected against overheating and reverse polarity connection

The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.

Five LED’s for status and mode indication

When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button:

  1. Current limited t0 0,8A and 14,4V absorption voltage. The red LED <14Ah will be on. 
  2. Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
  3. Current 4A and 14,7V absorption voltage. The red LED COLD will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example). 

Until the battery is fully charged, the red LED CHARGE will be on.

After completion of the charge process, the red LED FULL will be on.

In case of reverse polarity connection, the red LED ! will be on.

If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.

The charger always starts in STANDBY mode when connected to the AC supply.

Learn more about batteries and battery charging To learn more about batteries and charging batteries, please refer to our book ‘Energy Unlimited’ (available free of charge from Victron Energy and downloadable from www.victronenergy.com).

More Information
Manufacturer's Part Number IP65 12V/4A – 12V/0,8A
Charger Application General Purpose
DC Voltage 12V
Frequency (Hz) 50/60
Ingress Protection IP65
Number of Outputs 1
Length (mm) 186
Width (mm) 61
Height Inc Terminals (mm) 42
Weight 0.56
Warranty 5 Years
Write Your Own Review
You're reviewing:Victron Energy 4A Trickle Charger 12V/4A, Ideal for Car / Van / Leisure / Caravan - BPC120480034R
Your Rating