This is a Heavy Duty Domestic battery and it's purpose is to run applications with it's deep cycling capabilities
This range of Leisure / Marine batteries are of a lead calcium construction which means the plates have been hardened, therefore giving the battery a longer life and better starting capabilities than your conventional leisure batteries. These batteries come with a 4 Year Warranty and are perfect for domestic use.
This battery comes fully charged and ready for use
It is a DEEP CYCLE battery, which means unlike a car battery, they can handle being discharged to a higher capacity and recharged again without affecting the future performance of the battery. Another thing to note about these batteries which is vital is that when charging and discharging they have 250 life cycles.
Excellent design handle - Easy battery replacement
Integrated computer designed and reinforced container - Protection from vibrations and impact
Special sealed covers - Prevents acid leaks and minimizes gassing
Totally sealed and spill proof
Maintenance Free - no topping up required
Dual terminal options
Glass fibre separators
Safety venting system
Sealed water recombination system
Charge level indicator
Tough polypropylene case design
Victron Energy BPC120480034R Smart Charger
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger. Charger for 12V batteries with two charge current options: IP65 Charger 12V/4A - 12V/0.8A
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ?equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
Five LED’s for status and mode indication
When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge profiles with the MODE button:
Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example). Until the battery is fully charged, the red LED CHARGE will be on. After completion of the charge process, the red LED FULL will be on. In case of reverse polarity connection, the red LED ! will be on If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is interrupted.
|SKU||XV31 & BPC120480034R|
|Manufacturer's Part Number||XV31 & BPC120480034R|
|Height Inc Terminals (mm)||242|
|Battery Type||Sealed Calcium|