Hankook XV31 Leisure Battery
The XV dual purpose leisure range are designed to meet the needs of leisure and marine vehicles. With its twin marine terminals and sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the leisure industry. This range is suited to seasonal use such as Caravans, Motorhomes, Boats, RV, Camping and much more.
Features
- X-Frame
- Special (thicker) plate with high density active material
- Calcium + high tin alloy
- New special tissue
- Supplied charged and ready to fit
- Strong carry handle
Vibration resistant design
- Low resistance enveloped separator with glass mat
- Hot melt glue
- Reinforced container
Benefits
Longer life & high cycle stability
- High endurance in deep cycle service
- Flexible design for deep cycling
- More electric power to terminal posts
- The MF endurance by reserving more electrolyte volume over the plate
X-Frame
Full framed grid (round edge design)
- Full framed grid design restrains grid growth and short-circuits. Benefit: Upgraded quality and longer life span
Unique designed grid for electric flow
- As punching grids mechanically, it ensures high electric conductivities and strong adhesion of active materials. Benefit: Providing higher starting, power, stable structure and few corrosion.
Victron Energy PIN125010400 Inverter
Inverters allow you to power domestic equipment - requiring 230V/120V AC - using 'leisure' or 'automotive' batteries rated at 12V, 24V or 48V DC.
Highly Reliable - built for the years ahead
Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.
Full bursts - High Peak output
Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.
Intelligent alarms, shut-downs, and re-starts
A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.
Conserve power with Eco mode
In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.
User-configurable settings
Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• Output voltage 210 - 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sense level
Monitoring:
• In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description.
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
Available with different output sockets
Schuko, UK, AU/NZ, IEC-320, Nema 5-15R
DC connection with screw terminals
No special tools needed for installation
Victron Energy ASS030536011 Bluetooth Dongle
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data.
The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.
SKU | XV31, PIN125010400 & ASS030536011 |
---|---|
Manufacturer's Part Number | XV31, PIN125010400 & ASS030536011 |
Length (mm) | 330 |
Width (mm) | 172 |
Height Inc Terminals (mm) | 242 |
Weight | 23 |
Voltage (V) | 12 |
Ah | 100 |
Cold Cranking | 800 |
Layout | LH+ |
Terminal | Dual Post, Standard Automotive & Threaded Post |
Battery Type | Sealed Calcium |
Activation Pack | No |
Warranty | 4 Years |