CALL US 01684 298 800

100AH Lithium Battery with Sterling Power Charger BB1230 Package Deal

Package Deal For Two 84 AH Lithium Batteries With Victron Charger

Package Deal For Two 84 AH Lithium Batteries With Victron Charger

Package Deal For Two 100AH Lithium Battery with Sterling Power Charger BB1260

Package Deal For Two 100AH Lithium Battery with Sterling Power Charger BB1260

£799.00
Availability: In stock
SKU
TN-LFP12.8V100AH & BB1230
Rating:
100% of 100
  • TN-LFP12.8V100AH & BB1230
  • TN Power
  • 12
  • 100
  • Deep Cycle

Features

◆ Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions

◆ Built-in automatic protection for over-charge, over discharge, over current and over temperature

◆Free of maintenance

◆ Internal cell balancing

◆ Lighter weight: About 40% ~50% of the weight of a comparable lead acid battery.

◆ Can be charged using most standard lead-acid charges (set)

◆ Wider temperature range:-20℃~60℃

◆ Support for Series application expansion (up to 51.2V) and two in parallel

Applications

◆ UPS

◆ Solar &Wind Power System

◆ Golf Cart

◆Electric Vehicle , E-bike, E-rickshaw etc.

◆ Lighting


Suitable for

 Boats, RV, Leisure Boats, Marine and more

 

Description

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge.

3 Activation Modes

1) Automatic - Default, operates on input voltage (13.3V / 26.6V on) and complements regenerative braking with low voltage timer. No ignition feed required.

 

2) Ignition feed with timer. As above, however, requires a live ignition feed to operate. Input voltage figures and timings, as above.

 

3) Ignition feed without timer. As above, however, the timer does not kick in, so it can potentially stay on indefinitely provided input voltage stays above a certain low threshold.

 

Features

The default mode, which is Automatic Regenerative Braking Friendly, does not require an ignition feed to operate. It works on input voltage and timing algorithms (These values can be customised on the unit). This is ideal for most setups as ignition feeds are getting increasingly hard to find on modern vehicles, this new unit is therefore simple to install. 

 

Very simple to install. No Electronic Control Unit (ECU) issues. No complex wiring. No Warranty issues. Fully prepared for smart alternators (Regenerative braking). 

 

4 stage battery charging. The B2B charges batteries between 5-20 times faster than a stand alone alternator.

 

9 preset battery chemistry options including AGM, LiFePO4, Gel, flooded and sealed lead acid. 

 

Customizable profile - choose your your own charging profile on the front panel.

 

B2B turns on at 13.3V and turns off at 13.0V (x2 for 24V). Thus, does not drain input battery. Regenerative braking mode shall allow the input voltage to drop to 12.2V (x2 for 24V). 

 

Boost / Reduce Charging. The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 

 

Night time setting allows the unit to run at ? power so the fan noise is kept down.

 

Adjustable current limit. The current limit can be reduced to 50%. 

 

Dynamic thermal charging, the charging voltage fluctuates based on the temperature of the sensor (included ->). 

 

Current is NOT taken from the input battery and given to the output battery except during the low voltage timer for regenerative braking mode. This time frame can be increased in length or brought down to 0 seconds. 

 

Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V. Up to 800W rating. Much larger model up to 3000W coming soon. 

 

Safety features

100% fire proof plastic box

No screws to corrode

Thermal power reduction

Multi stage fan cooling

More Information
SKU TN-LFP12.8V100AH & BB1230
Manufacturer's Part Number TN-LFP12.8V100AH & BB1230
Description 100AH Lithium Battery with Sterling Power Charger
Length (mm) 328
Width (mm) 172
Height Inc Terminals (mm) 220
Weight 13.1
Voltage (V) 12
Ah 100
Layout LH+
Terminal M8
Battery Type Lithium
Activation Pack No
Warranty 2 Years
Write Your Own Review
You're reviewing:100AH Lithium Battery with Sterling Power Charger BB1230 Package Deal
Your Rating