Package consists of 1x XV110 (Titanium), 1x ORI121222120, 5x CSW3-50R, 5x CSW3-50B and 4x T16-10


Titanium XV110 Leisure Battery

This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.

This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.

The product is supplied charged and ready to fit.



  • Excellent design handle – Easy battery replacement
  • Integrated computer designed and reinforced container – Protection from vibrations and impact
  • Sealed covers – Prevents acid leaks and minimizes gassing
  • Totally sealed and spill proof
  • Maintenance Free – no topping up required
  • Glass fibre separators
  • Safety venting system
  • Sealed water recombination system
  • Tough polypropylene case design


Victron Energy Orion-Tr Smart 12/12V 18A (220W) Isolated DC-DC Charger

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.



Bluetooth Smart enabled

Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Fully programmable

Battery charge algorithm (configurable) or fixed output.

Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk – absorption – float

For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

For lithium batteries absorption time is fixed, default 2 hours.

Alternatively, a fixed output voltage can be chosen.

Remote on-off

A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example)

All models are short circuit proof and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

High temperature protected

The output current will reduce at high ambient temperature.

IP43 protection

When installed with the screw terminals oriented downwards.

Screw terminals

No special tools needed for installation.

Input fuse (not replaceable)


16mm2 Red Cable


  • Suitable working temperature -15°c to +70°c
  • Single insulated PVC
  • Plain copper conductors (stranded)
  • Resistant to Petrol, moisture, abrasion, lubricating oils and diluted acids


16mm2 Black Cable


  • Suitable working temperature -15°c to +70°c
  • Single insulated PVC
  • Plain copper conductors (stranded)
  • Resistant to Petrol, moisture, abrasion, lubricating oils and diluted acids



T16-10 Copper Tube Lug

The Termination Technology range of standard copper tube terminals is manufactured from seamless copper tube. All terminals are provided with an inspection hole to ensure the conductor is fully inserted before crimping. A bell mouth also ensures a smooth transition from lug to cable, thus avoiding the problems of chafing where the component is subject to vibration.


Stud Hole – 10

Cable mm2  – 16mm

Weight25100 g

Titanium and Victron Energy

Manufacturer Part Number

XV110 (Titanium), ORI121222120, CSW3-50R x5, CSW3-50B x5 and T16-10 x4

Battery Voltage


Battery Capacity (C20)


Cold Cranking


Terminal Type

A, Standard Automotive

Terminal Layout

Right Hand Positive

Battery Dimensions (Including Terminals)

L354 x W174 x H190mm

Battery Weight


Battery Technology

Sealed Calcium

Battery Application

Dual Purpose

Charger Voltage


Cont. Output Current


Charger Dimensions

H130 x W186 x D70mm

Charger Weight


Red Cable Length


Red Cable Thickness


Black Cable Length


Black Cable Thickness


Lug Stud Hole



4 Years


There are no reviews yet.

Be the first to review “110Ah Leisure Battery, 18A Isolated DC-DC Charger Kit with Cables and Lugs”

Your email address will not be published.