Package consists of 2x SPM041751200, SCC110020160R, 2x SCA000500000 & 2x Z Bracket

 

Victron Energy Solar Panel 12V 175W Mono series 4a

  • Low voltage-temperature coefficient enhances high-temperature operation.
  • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
  • 25-Year limited warranty on power output and performance.
  • 5-Year limited warranty on materials and workmanship.
  • Sealed, waterproof, multi-functional junction box gives high level of safety.
  • High performance bypass diodes minimize the power drop caused by shade.
  • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
  • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
  • Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
  • High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.

 


Victron Energy SmartSolar MPPT 100V 20A

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

 

Features

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

VE.Direct

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm

See the software section on our website for details

Day/night timing and light dimming option

See the software section on Victron for details

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

 


Victron Energy Solarcable L=5m/4sqmm MC4-M/F

5m/4spmm MC4-M/F of Solarcable

 


Z Bracket Mounting Aluminium Fixing Set

These brackets are made from 2mm aluminium

Included:

  • 4x Z-Shape Tabbed Solar Panel Brackets
  • 8x Stainless Steel Self Tapping Screws
  • 4x Stainless Steel Spring Washers
  • 4x Stainless Steel Short Bolts
  • 4x Stainless Steel Washers
  • 4x Stainless Steel Nuts
Weight11750 g
Brand

Victron Energy

Manufacturer Part Number

2x SPM041751200, SCC110020160R, 2x SCA000500000 and 2x Z Bracket

Solar Panel Voltage

12V

Nominal Power

175W

Cell Type

Monocrystalline

Number of Cells in Series

36

Maximum System Voltage

1000V

Solar Panel Dimensions

L1485 x W668 x D30mm

Solar Panel Weight

11Kg

Solar Panel Country of Manufacture

China

MPPT Voltage

12/24/48V

Rated Charge Current

20A

Nominal PV Power, 12V

290W

Max. PV Short Circuit Current

20A

Max. PV Open Circuit Voltage

100V

Protection Category

IP43 (electronic components), IP22 (connection area)

Efficiency

98%

Bluetooth Enabled

Yes

MPPT Dimensions

H100 x W113 x D60mm

MPPT Weight

0.65Kg

MPPT Country of Manufacture

India

Cable Length

5m

Cable Thickness

4sqmm

Cable Country of Manufacture

China

Warranty

5 Years

WooCategory1

Kits & Packages

WooCategory2

Off-Grid Kits

WooCategory3

Off-Grid Kits Solar Panel Kits

WooCategory4

Vehicle Conversion Kits

WooCategory5

Vehicle Conversion Kits Solar Panel Kits

Reviews

There are no reviews yet.

Be the first to review “Victron 350W Mono Solar Panel Kit with SmartSolar MPPT 100/20, Solarcable and Mounts”

Your email address will not be published.

You may also like…