Victron Energy BlueSolar PWM LCD&USB 12/24V 20A – SCC010020050
Liquid crystal display
For status monitoring and set-up
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2A
|Manufacturer Part Number|
12/24 V automatic system voltage detection
|Rated Charge Current|
|Maximum Solar Voltage|
28V / 55V
Manual control + low voltage disconnect + timer
H96 x W169 x D36mm
|Country of Manufacture|