Victron Energy BMV-702 Battery Monitor and Wall Mount Enclosure

£200.55

In stock

SKU: BAM010702000 & ASS050500000 Categories: , ,

Product Description

Package consists of 1x BAM010702000 & 1x ASS050500000

 

BMV-702 Battery Monitor

The BMV-702 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

 

Features

Battery ‘fuel gauge’, time-to-go indicator, and much more

The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.

Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.

Easy to install

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed.

Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.

BMV-702 additional features

Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.

 

Standard features

  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Remaining time at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay, to turn off non critical loads or to run a generator when needed
  • 500 Amp quick connect shunt and connection kit
  • Shunt selection capability up to 10.000 Amps
  • VE.Direct communication port
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
  • Wide input voltage range: 6,5 – 95V
  • High current measurement resolution: 10 mA (0,01A)
  • Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V

 


 

Wall Mount Enclosure for BMV or MPPT Control

Easily mount your BMV or MPPT Control to the wall

Additional Information

Brand

Victron Energy

Manufacturer Part Number

BAM010702000 & ASS050500000

Monitor Supply Voltage Range

6.5-95VDC

Monitor Battery Capacity

1-9999Ah

VE.Direct Communication Port

Yes

Monitor Protection Category

IP65

Front Bezel

69 x 69mm

Body Diameter and Depth

52 x 31mm

Monitor Warranty

5 Years

Monitor Country of Manufacture

Malaysia

Wall Mount Dimensions

H88 x W130 x D47mm

Wall Mount Warranty

5 Years

Wall Mount Country of Manufacture

India

Reviews

There are no reviews yet.

Be the first to review “Victron Energy BMV-702 Battery Monitor and Wall Mount Enclosure”

Your email address will not be published. Required fields are marked *

Victron Energy BMV 700 Series Data Sheet – CLICK HERE

Victron Energy Wall Mounted Display Enclosures Data Sheet – CLICK HERE