Victron Energy BMV-712 Smart Battery Monitor & Long Range Smart Battery Sense

£238.35

In stock

SKU: BAM030712000R & SBS050150200 Categories: ,

Product Description

Victron Energy BMV-712 Smart Battery Monitor

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

 

Features

Bluetooth inside

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

Download the Victron Bluetooth app

Use a smartphone or other Bluetooth enabled device to – customize settings, – monitor all important data on single screen, – view historical data, and to – update the software when new features become available.

Easy to install

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed.

Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.

Midpoint voltage monitoring

One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.

We recommend the Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries.

Very low current draw from the battery

Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.

Bi-stable alarm relay

Prevents increased current draw in case of an alarm.

 


 

 

Victron Energy Smart Battery Sense Long Range 10-meters

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.

With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.

Improves battery charging

By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage.

For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.

Look no wires

The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network – a wireless technology based on Bluetooth Smart.

Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app.

Tidy, simple – smart

Installation is simple, quick and tidy. Just connect the unit’s two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip.

Additional Information

Brand

Victron Energy

Manufacturer Part Number

BAM030712000R & SBS050150200

Monitor Supply Voltage Range

6.5-70VDC

Monitor Battery Capacity

1-9999Ah

Monitor Temperature Sensor

Optional

Monitor VE.Direct Communication Port

Yes

Monitor Protection Category

IP55

Monitor Front Bezel

69 x 69mm

Monitor Body Diameter & Depth

52 x 31mm

Monitor Warranty

5 Years

Monitor Country of Manufacture

Malaysia

Operating Voltage Range

8-60V

Absolute Maximum Voltage

65V

Cable Length

45cm

Battery Sense Dimensions

H14 x W38 x D38mm

Battery Sense Warranty

5 Years

Battery Sense Country of Manufacture

Malaysia

Reviews

There are no reviews yet.

Be the first to review “Victron Energy BMV-712 Smart Battery Monitor & Long Range Smart Battery Sense”

Your email address will not be published. Required fields are marked *

Victron Energy BMV 712 Smart Data Sheet – CLICK HERE

Victron Energy Smart Battery Sense Data Sheet Download – CLICK HERE

Victron Energy Smart Battery Sense Manual – CLICK HERE