Victron Energy Cyrix-Li-charge 12/24V 120A Intelligent Charge Relay – CYR010120430

£70.80

In stock

Product Description

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay: – if the Charge Disconnect output of the VE.Bus BMS is high, and – if it senses 13,7V (resp. 27,4V or 54,8V) or more on its battery charger connection terminal, and – if it senses 2V or more on its battery terminal (the Cyrix will remain open, if not connect to the battery).

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature.

In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay of 3 seconds. After two attempts to reengage with 3 seconds delay, the delay increases to 10 minutes.

Whenever battery voltage is less than 13,5V (resp. 27V or 54V), the Cyrix will disengage with a delay of 1 hour. Note 1: In case of zero discharge current, or a small discharge current, the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13,5V. Note 2: If, after the Cyrix has disengaged, the output of the battery charger immediately increases to 13,7V or more, the Cyrix will re-engage, with 3 seconds delay

Additional Information

Weight110 g
Brand

Victron Energy

Manufacturer Part Number

CYR010120430

Voltage (V)

12/24

Continuous current & Breaking capacity at 12V or 24V

120A

Current Consumption When Open

4 mA

Protection Category

IP54

Dimensions

H46 x W46 x D80mm

Weight (kg)

0.11

Warranty

5 Years

Country of Manufacture

Malaysia

Reviews

There are no reviews yet.

Be the first to review “Victron Energy Cyrix-Li-charge 12/24V 120A Intelligent Charge Relay – CYR010120430”

Your email address will not be published. Required fields are marked *

Victron Energy Cyrix Li-ion 120A Data Sheet – CLICK HERE