Victron Energy Inverter RS 48/6000 230V Smart Solar – PIN482601000
The Inverter RS Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation.
The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect App. In addition to this, the inverter has a VE.Direct and a VE.Can Port, for connection to a GX device for system monitoring.
Off-Grid solar inverter
The Inverter RS Smart Solar 48/6000 is a 48V 6kVA Inverter with 450VDC 4kWp PV input. It is used in off-grid solar applications where AC power is required.
Combination of an inverter, bi-directional DC-DC converter and MPPT
The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed.
Wide MPPT voltage range
80 – 450VDC, with a 120VDC PV startup voltage.
Light weight, efficient and quiet
Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
Display and Bluetooth
- The display reads battery, inverter and solar charge controller parameters.
- The same parameters can be accessed with a smartphone or other Bluetooth enabled device.
- In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.
VE.Can and VE.Direct port
For connection to a GX device for system monitoring, data logging, and remote firmware updates.
Built in PV isolator
Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit.
Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron miniBMS.
|Manufacturer Part Number|
|DC Input voltage range|
|Continuous Output Power at 25°C|
Increases linearly from 4800W at 46VDC to 5300W at 52VDC
|Continuous output power at 40°C|
9kW for 3 seconds
|Zero load power|
|Maximum DC voltage|
|Nominal DC voltage|
|MPPT operating voltage range|
|Charge voltage absorption (V DC)|
|Charge voltage float (V DC)|
|Maximum charge current|
|Battery Temperature Sensor|
|Parallel and 3-phase operation|
|Data Communications Ports|
VE.Direct port and VE.Can port
H425 x W440 x D125mm
|Country of Manufacture|