Victron Energy LiFePO4 Battery 12.8V 100Ah Smart – BAT512110610

£1,101.31

In stock

Product Description

Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

Rugged

A lead-acid battery will fail prematurely due to sulfation:

• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).

• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).

A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).

LFP is therefore the chemistry of choice for demanding applications.

Efficient

In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.

The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.

The round-trip energy efficiency of a LFP battery is 92%.

The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).

In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.

Size and weight

Saves up to 70% in space Saves up to 70% in weight

Expensive?

LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.

Bluetooth

With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance

Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).

Battery Management System (BMS)

The BMS will: 1. Generate a pre-alarm whenever the voltage of a battery cell decreases to less than 3,1V (adjustable 2,85 – 3,15 V). 2. Disconnect or shut down the load whenever the voltage of a battery cell decreases to less than 2,8V (adjustable 2,6 V – 2,8 V). 3. Stop the charging process whenever the voltage of a battery cell increases to more than 3,75 V or the temperature increases to more than 60°C. See the BMS datasheets for more features

Additional Information

Weight15000 g
Brand

Victron Energy

Manufacturer Part Number

BAT512110610

GTIN

8719076043041

Nominal Voltage

12.8V

Nominal Capacity @ 25°C

100Ah

Nominal Energy @ 25°C

1280Wh

80% DoD

2500 cycles

70% DoD

3000 cycles

50% DoD

5000 cycles

Maximum continuous discharge current

200A

Protection Class

IP22

Charge Voltage

Between 14V/28V and 14,4V/28,8V (14,2V/28,4V recommended)

Maximum Charge Current

200A

Max storage time @ 25°C

1 year

BMS Connection

Male + female cable with M8 circular connector, length 50cm

Power Connection (threaded inserts)

M8

Terminal Layout

RH+

Dimensions (Including Terminals)

H197 x W321 x D152mm

Weight

14Kg

Warranty

3 Years

Battery Technology

Lithium

Country of Manufacture

China

Reviews

There are no reviews yet.

Be the first to review “Victron Energy LiFePO4 Battery 12.8V 100Ah Smart – BAT512110610”

Victron Energy 12.8V & 25.6V Lithium Iron Phosphate Batteries Smart Data Sheet – CLICK HERE