CALL US 01684 298 800

Victron Energy BatteryProtect 12/24V-65A - BPR000065400

Victron Energy Battery Protect 12/24V 100A - BPR000100400

Victron Energy Battery Protect 12/24V 100A - BPR000100400

Special Price £31.08 Regular Price £38.85
Availability: In stock
SKU
BPR000065400
Rating:
100% of 100
  • BPR000065400
  • Victron Energy
  • Battery Management

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Features

12/24V auto ranging

The BatteryProtect automatically detects system voltage

Programming made easy

The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries

In this mode the Battery Protect can be controlled by the VE.Bus BMS. Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Ignition proof

No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

More Information
SKU BPR000065400
Manufacturer's Part Number BPR000065400
Description Battery Protect 12/24V 65A
Length (mm) 106
Width (mm) 48
Height Inc Terminals (mm) 40
Weight 0.2
Volt 12/24V
Warranty 5 Years
Write Your Own Review
You're reviewing:Victron Energy BatteryProtect 12/24V-65A - BPR000065400
Your Rating
We found other products you might like!