SCC010015050R - MPPT 75/15
The Victron MPPT controller will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement, of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12 volt battery on one side of the MPPT charge controller and a large number of cells wired in series to produce 36 volts on the other.
To fully exploit the potential of the MPPT controller, the array voltage should be substantially higher than the battery voltage. The MPPT controller is the solution of choice for higher power systems because of the lowest overall system cost due to smaller cable cross sectional areas. It will also harvest substantially more power when the solar cell temperature is low (below 45°C), or very high (above 75°C), or when irradiance is very low.
ASS030536010 - Bluetooth Dongle
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data.
The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.
The Victron VE.Direct Bluetooth Smart dongle uses Bluetooth Low Energy, which is a technology for the Internet of Things (IoT).
|SKU||SCC010015050R & ASS030536011|
|Manufacturer's Part Number||SCC010015050R & ASS030536011|
|Description||Blue Solar MPPT 75/15 & Bluetooth Dongle|
|Height Inc Terminals (mm)||40|