CALL US 01684 298 800

Victron BlueSolar MPPT 100/30 (12/24V-30A) - SCC020030200

Victron BlueSolar MPPT 100/15 (12/24V-15A)

Victron BlueSolar MPPT 100/15 (12/24V-15A) - SCC010015200R

Victron BlueSolar MPPT 100/50 (12/24V-50A)

Victron BlueSolar MPPT 100/50 (12/24V-50A) - SCC020050200

Availability: In stock
100% of 100
  • SCC020030200
  • Victron Energy
  • Solar Charge Controller

The Victron MPPT controller will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement, of the battery plus load. Thus, it essentially decouples the array and battery voltages so that there can be, for example, a 12 volt battery on one side of the MPPT charge controller and a large number of cells wired in series to produce 36 volts on the other.

To fully exploit the potential of the MPPT controller, the array voltage should be substantially higher than the battery voltage. The MPPT controller is the solution of choice for higher power systems because of the lowest overall system cost due to smaller cable cross sectional areas. It will also harvest substantially more power when the solar cell temperature is low (below 45°C), or very high (above 75°C), or when irradiance is very low.

Key Features:

  • Ultra-fast Maximum Power Point Tracking (MPPT).
  • BatteryLife: intelligent battery management by load shedding.
  • Resin encapsulated electronics: Protects the electronic components against the environment.
More Information
SKU SCC020030200
Manufacturer's Part Number SCC020030200
Description Blue Solar MPPT 100/30
Length (mm) 70
Width (mm) 186
Height Inc Terminals (mm) 130
Weight 1.3
Volt 12 / 24
Warranty 2 Years
Layout RH+
Write Your Own Review
You're reviewing:Victron BlueSolar MPPT 100/30 (12/24V-30A) - SCC020030200
Your Rating